With her head….

Tag art again.

‘“In the Tower of London, large as life,

The ghost of Anne Boleyn walks, they declare.

Queen Anne Boleyn was once King Henry’s wife<

Until he made the headsman bob her hair”…

If you want the full song, click here...

Playing Catchup

I’m a bad blogger.  I’ve loads of craft projects which I haven’t got round to sharing, including some Yuletide greeting cards.  Better late than never...

 

I die-cut some of the snowflake shapes out of double-sided adhesive sheet and stuck them to the white card., (leaving the release paper on the top surface) went over it with distress ink (broken china and dusty concord) stamped some snowflake designs and embossed in white powder, then took the release paper off the snowflakes and sprinkled glitter over the sticky snowflakes. 

Shame it’s taken me till Easter to blog ‘em!

Put some gears on it…

 

This box came with a crystal inside.  It is so sturdy that it was a pity not to do something with it!  So it was out with the Eco-Green paints and sprockets, some chipboard numbers I got from a pound shop, and some Tim Holtz Gadget Gears cut from greyboard.  It came out pretty well.

 

Faux Books

Another idea borrowed from Craft Stamper !

This is such a cool technique.  The covers of the “book” are made out of a piece of card, 6 inches wide and 11 inches long, creased at 4.5 inches and 6.5  inches.  To make the “pages” of the faux book, you take 2 pieces of paper just under 4.5 inches by 11  and 2 pieces just under 6 inches by 11.  Concertina them (I used the Hougie board to get  the concertina pleats spaced evenly, 1 cm apart.  The fun begins then as you need to interlock the folds (easiest if you do a short side to a long side, then repeat, then put it all together and let it dry. This is fiddly and you need a good glue (I used the Paper Flower Expert glue)

The example in the magazine was covered in pretty paper and stamped with a lovely sentiment.  The first one I made was similar – then I remembered the faux leather technique and thought..wouldn’t a “antique” leather faux book be cool?

The Faux Leather Technique

You need some card to turn into “leather” and some dimensional paint – I used Tulip paint – in a mix of colours of your choice and a roller/brayer. It doesn’t have to be fancy.   If you have a old ink roller that used to be used for lino prints or similar that will work fine.  Be warned – if you are going to use your best Speedball brayer have a bowl of water ready to drop the brayer into as soon as you’ve finished as once the paint dries it’s in place for good and will wreck your brayer, so clean it IMMEDIATELY.  You also need a non-stick craft sheet or something to mix and roll the paint on – I use the lid of an ice-cream container.

Spread dollops of paint onto your craft sheet or whatever you’re using and mix them up.  Once you’re happy with the blend, load your roller and roll the paint onto the card.  Once you’ve got it covered, go over it one last time, rolling in one direction (e.g. away from you or towards you but not both).    The card will have a  texture like fine hide – now clean the roller and leave the card to dry.

The core of the “book” is shirt cardboard.  The “leather” card and the marbled paper  lining give it strength.

I call this one “Coppelia” after the ballet – Coppelia was, I think, a life-sized dancing doll so the clockwork seemed to fit.

Bright Elusive butterfly.    This one was inspired by a Val Doonican song that I had running through my head. 

More Tags

It’s been all quiet on the tagging front lately;  I’ve been off concocting Steampunk items, including a set of Victorian undercrackers (with real drawers that are basically two legs on a waistband!).  I shall be returning to the sewing machine in August, when I have some time off booked – I will be making myself a corset.  Determined to lose some weight, also, so I’m holding off on making my costume, but I have the material stashed away.
Still , I’m back to making tags for now. ‘

This is my version of one of Tim Holtz’s tags, using one of his Alterations dies.  The cage was cut on my Craft Robo (file downloaded from Silhouette).  You can just see the diamond pattern which was stamped in Castaway ink – when heated it changed the ink to that vivid turquoise in the top left of the tag .

Back to the seaside again!

And again.  The mesh on the corners is plasterer’s mesh tape, sprinkled with gold embossing powder.  The little bottle is UTEE, melted and poured into a mould taken from a tiny bottle.  I put a “message” inside while it was still molten.  The large shells and starfish are paperclay – the moulds came from a sugarcraft shop.

Bird and cage cut wiith Robo, files from Silhouette.  The butterfly was coloured with Big & Juicy inks to tone with the rest of the tag – the original yellow was too harsh.

Tags, Drawers and Oddments!

I don’t update this blog as often as I should;  the reason (I tell myself) is because I’m working on a laptop and my keying doesn't seem to work properly.

I was trained to key (Vehicle Registration Documents) by the Civil Service and I’ve never cottoned on to the flat keyboard.  Yes, I do have a proper keyboard that plugs in via the USB port but the other half has had a laptop malfunction (he cracked the screen – could have been a disaster but he’d forgotten to cancel the “30 days free” insurance when it went to “pay for if you want to keep it” and as a result was covered for the damage!) and has stolen the keyboard to run his old laptop which has a worse keyboard than mine…he says.

Anyhow, here’s some of what I’ve been busying myself with lately.

Paint fusion, again.

 

I finally got around to doing my IKEA mini-chest.  I like these drawers as they can be put into the chest either way round (if you follow me) so you can get two different looks!  I may change the small drawers in the top layers – perhaps.

I’ve just ordered the new sets so no doubt there’ll be more to come.

 

However, just at the moment I’ve been doing some Tag art.  I love the Tim Holtz/Grunge/Vintage look and started off to practice some of the techniques in the Compendium of Curiosities.  Not sure what happened – I seem to have gone all nautical!

I’d had some AMACO moulds of the celestial embellishments for ages and  recently saw the large seahorse and seashells moulds in the sugarcraft shop – I went in there to buy a small cutter for Friendly Plastic and there was a wall FULL of all sorts of moulds.  I’ve been playing with Paper clay and air-hardening clay so I had a good stock of embellishments in my bits box all ready to go!

This was the first of the three I made.  I started with the compass mask (from Clevercut) and sprayed it .  For some reason I had John Masefield’s poem “Cargoes” in my head -

Cargoes

Quinquereme of Nineveh from distant Ophir,
Rowing home to haven in sunny Palestine,
With a cargo of ivory,
And apes and peacocks,
Sandalwood, cedarwood, and sweet white wine.

 
Stately Spanish galleon coming from the Isthmus,
Dipping through the Tropics by the palm-green shores,
With a cargo of diamonds,
Emeralds, amethysts,
Topazes, and cinnamon, and gold moidores.

 
Dirty British coaster with a salt-caked smoke stack,
Butting through the Channel in the mad March days,
With a cargo of Tyne coal,
Road-rails, pig-lead,
Firewood, iron-ware, and cheap tin trays.

 

I don’t know how to describe the material the gold wires were made from – it’s a sort of springy stuff that shivers and tinkles and snakes around.  I pulled it out and then made it into a bundle, threaded crystals on it (diamonds,emeralds,amethysts!)

The small shells and seahorses on this one have been in my stash for ages – I got them from the Works!   The large shell, starfish and seahorse are paperclay.  The “Tethys” plaque (goddess of the sea) is shrink plastic and the shell corner stamp is from Clarity, and was where the tag started.

The ship was cut with my Craft Robo- the shape was downloaded using the Silhouette software.

More Paint Fusion!

I am LOVING Paint Fusion.  And I really love this little chest of drawers by Kaisercraft (got ir from Merly)  Now what should I keep in it?  Jewels, perhaps!

I also altered my specs case some time ago so it’s about time I shared a picture